Part no: SMX3000RMLV2U

APC Smart-UPS Rackmountable Tower – LCD, 3000VA, 100-127V SMX3000RMLV2U

Call for Details | Why Can't I See a Price?

Touchpoint can assist with new and refurbished equipment in most cases.

Request a Quote

  • We are a B2B sales organisation & do not sell to individual consumers.
  • We are located in Australia and in most cases will not be able to sell outside AU/NZ
  • This field is hidden when viewing the form
  • This field is hidden when viewing the form
  • This field is hidden when viewing the form

APC Smart-UPS Rackmountable Tower – LCD, 3000VA, 100-127V

Part Number: SMX3000RMLV2U

 

  • Draws backup power from hot-swappable, user-replaceable batteries. Add packs to boost runtime capacity.
  • Intelligent battery management improves reliability and extends battery life.
  • Generator compatible and cold start-capable, so you can deliver clean, uninterrupted power to protected equipment during outages.
  • Features a USB port and a SmartSlot internal accessory slot for installing optional cards to enhance performance and manageability.
  • Comes with standard 19-inch (48.3-cm) mounting rails, brackets, and hardware.
  • Boost and trim automatic voltage regulation (AVR) gives higher application availability by correcting low and high voltage conditions without using the battery.
  • Maximizes battery performance, life, and reliability through intelligent precision charging.
  • Temperature-compensated battery charging prolongs battery life by regulating the charge voltage according to battery temperature.
  • Automatic restart of loads after UPS shutdown.
  • Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Disconnected battery notification warns when a battery is not available to provide backup power.
  • Provides remote management of the UPS over the network.
  • Audible alarms actively let you know if the unit is on battery, if the battery is low, or if there is an overload condition.
  • Serial connectivity provides management of the UPS via a serial port.
  • USB connectivity provides management of the UPS via a USB port.
  • Disconnected battery notification warns when a battery is not available to provide backup power.
  • User-replaceable batteries increase availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).
  • Hot-swappable batteries ensure clean, uninterrupted power to protected equipment while batteries are being replaced.
  • Predictive failure notification provides early-warning fault analysis ensuring proactive component replacement.
  • Resettable circuit breakers enable a quick recovery from overload events.
  • Adjustable voltage-transfer points maximize useful battery life by widening the input voltage window or tightening the output voltage regulation.
  • Adjustable voltage sensitivity provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Field-replaceable power distribution panel ensures compatibility with equipment that has different plug types.

 

Compliance
cUL 0
FCC
UL 0
General
Adjustable Range for Power Operation 75-154 V
Audible Alarms Alarms indicating battery operation and low battery detection
Backup Time (Typical) At full load (2700 W): 5.4 minutes; At half load (1350 watts): 15 minutes
Battery RBC� Quantity 1
Battery Recharge Time (Typical) 3 hours
Battery Type Maintenance-free sealed lead-acid battery with suspended electrolyte, leakproof
Configurable Power (Maximum) 2700 W/3000 VA
Crest Factor Up to 5:1
Filtering Full-time multipole noise filtering with 0.3% IEEE surge let-through and zero clamping response time that meets UL® 1449
Input (Nominal) 120 VAC, 50-60 Hz, +/- 3 Hz, autosensing
Input Voltage Range for power operations: 82-144 V
Interface (1) DB9 F (RS-232) serial port, (1) battery pack port, (1) USB port, (1) SmartSlot card slot, (1) EPO (emergency power off) port
On-line Thermal Dissipation 276 BTU/hr.
Operating Temperature 32 to 104° F (0 to 40° C)
Output Frequency (Sync to Mains) 47-53 Hz for 50 Hz (nominal), 57-63 Hz for 60 Hz (nominal)
Output Power 2700 W/3000 VA
Output Receptacles (3) NEMA 5-15R, (3) NEMA 5-20R, (1) NEMA L5-30R
Output Voltage Distortion Less than 5% at full load
Output Voltage (Nominal) 120 V
RoHS Yes
Runtime (Maximum) 8 hours, 27 minutes
Surge Energy Rating 540 joules
Waveform Type Sine wave